ASCO Valve

ASCO™ Series 256 Compact Solenoid Valves The ASCO Series 256 solenoid valves are designed for shutoff control for a wide range of Industrial and commercial industry applications. The valves have a range of third-party approvals for applications ranging from fuel oil and gas burners to potable water and food service applications. Their compact design fits in tight spaces, they are mountable in any position and are available in multiple manifold configurations. The valves are ideal for bottling lines, and commercial kitchen, laundry, and heating equipment.

ASCO™ Series 314 Solenoid Valves The ASCO Series 314 is a line of direct acting, general service solenoid valves which can be used as moderate flow pilots for smaller control valves and actuators. With only a spring and two moving parts, the valve is ideal for basic three-way piloting operation It is suitable for analytical and diagnostic equipment, automotive, bottling, dust collector system, and life science applications

ASCO™ Series 356 Solenoid Valves The ASCO Series 356 solenoid valves have a lightweight, compact design for the control of single-acting actuators or filling or draining cycles. The brass or stainless steel constructions feature a wide range of elastomers and tight shutoff poppets for specialty service applications.

ASCO™ Series 262/263 General Service Solenoid Valve The ASCO Series 262/263 is a line of 2-way general service and specialty service solenoid valves available in brass or stainless steel. These rugged valves handle media such as air/inert gas, water, hot water, steam, light oil, fuel gas, fuel oil, and cryogenic fluids. The 262/263 Series are suitable for commercial and industrial applications such as car wash systems, dishwashing and laundry equipment, pumps, compressors, boilers, burners, food processing and many others.

ASCO™ Series 238 Solenoid Valves The ASCO Series 238 is a line of general service valves designed to handle air, inert gas, water, and light oil. The 2-way pilot-operated valve’s compact construction saves space, reduces installation time, and simplifies service while its short stroke increases cycle life. The 238 Series is suitable for air ride suspension systems, commercial kitchen and laundry equipment, packaging, and water and wastewater systems

The ASCO Series 344 valves incorporate a piston-operated poppet design for high flow in a variety of applications. Their sturdy, robust construction can be used with air or water media. The 344 Series is suitable for use in analytical and diagnostic instruments, biofuels, heating equipment, life science production, and refining

ASCO™ Series 320 Solenoid Valve The ASCO Series 320-s are general-service solenoid valves designed for a broad range of applications. The direct-acting valves are available in voltage-ranging, harsh-environment, direct-mount, dribble-control, and long-life constructions. They are suitable for use in analytical and diagnostic equipment, dust collector systems, life sciences, and press room and metal stamping.

ASCO™ Series 320 Solenoid Valve The ASCO Series 320-s are general-service solenoid valves designed for a broad range of applications. The direct-acting valves are available in voltage-ranging, harsh-environment, direct-mount, dribble-control, and long-life constructions. They are suitable for use in analytical and diagnostic equipment, dust collector systems, life sciences, and press room and metal stamping.

ASCO™ Series 316 Solenoid Valve The ASCO Series 316 is a line of high flow, general service solenoid valves, which can be used to pilot large actuators and provide quick closing of large control valves. The diaphragm poppet design is suitable for controlling air, inert gas and liquids. Its resilient seating achieves tight shutoff.

TESCOM VA and VG Series are air operated valves offering normally open/normally closed capabilities, operating pressures up to 15,000 psig / 1034 bar, very high cycle life and optional integrated solenoid valve. Suitable for liquid and gas applications. Ideal for use in high pressure on/off control. Air operated and manual versions available, optional solenoid. Example uses: high pressure cycling testing, pneumatic and hydraulic control panels and R & D labs. Main value differentiator: high cycle life (long life span), high quality, smaller footprint compared to air actuated all valves, leak tight seal.

ASCO Series Q117 & Q217 (2 way) / Q317 (3 way) are designed for operation under very harsh conditions with good resistance to thermal shock (steam followed by cold water cycles). Ruggedly built , particularly recommended for steam, superheated water up to max 230˚C and high ambient temperatures up to 140˚C. Air-operated stainless steel piston structure is able to withstand a maximum pressure of 32 bar. Compact design reduces installation space and cost- optimized fluid flow geometry allowing high flow rates.

The ASCO Series 390 are pressure-operated, remote-controlled valves with discs for industrial fluid media. An anti-water hammer design has fluid entry under the disc for quiet operation. The valves feature long service life in high-cycling applications. A wide range of piston-type operators (63 - 90 -125 mm diameters) are rotatable through 360° for maximum performance at different minimum pilot pressures. The 390 Series is suitable for automotive, bottling, commercial laundry equipment, and heating and cooling circuit applications.

The ASCO Series 290 is a pressure-operated, direct acting angle-body piston valve built for demanding applications. Its straight-through body design is available in bronze or stainless steel. The valve is suitable for general service applications (air, inert gas, water, oil, and light slurries), plus steam, hot water, and auxiliary fluids within the food and beverage industry. Many optional features available including a visual/electrical position indicator or a stroke limiter.

The ASCO Series 553 is a line of compact solenoid spool valves that are ideal for controlling air or inert gas in challenging environments. The valves ’ unique design combines hard T-seals and flexible O-rings that provide bubble-tight shutoff, dirt resistance, and multi-million cycle reliability. The 551 Series comes in anodized aluminum, brass, and stainless steel bodies with ½-inch NPT and BSP connections. It is suitable for the harsh conditions found in chemicals, refining, food & beverage applications and life science processing.

FEATURES • Environment protected construction to protect against the ingress of liquid, dust • Compact size with high flow or any other foreign matter • Multiple functions available with 5/2 Threaded and NAMUR options • The same spool valve can be adapted for 3/2 #* or 5/2 functions for controlling double-acting and single-acting actuators • Internal breathing construction allows single-acting actuator to breath through the solenoid valve prolonging its lifespan • NAMUR design (LH Orientation & RH Orientation) ensures supply and exhaust ports of the solenoid valve are facing down to prevent water and debris ingress • Epoxy coil with excellent moisture and high ambient temperature resistance

The "NAMUR" style spool valve comes with threaded port connection and Namur interface, while the "THREADED" style spool valve comes with threaded port connection • All the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms as well as applications in the pharmaceutical and food processing sectors • The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matters (environmentally-protected construction